Accessing Hub Features
Interpreting Device Status
NormalActivity
Region
Current
Reading
Warning
Severity
Region
Critical
Severity
Region
The information shown for hubs is for all ports on the device. You can obtain information for each port by selecting the Performance Gauges button (Status tab), then selecting an individual port from the drop down list. If you want to monitor a different attribute for that port, just select the desired attribute from the drop down list below the port number.
You can also obtain information for all
Figure 12-3. Performance Gauges for a Hub
The following table explains the attributes and gives their threshold settings on a per port basis for hubs. These settings cannot be changed. You can view an attribute value for all the ports of a device by selecting All Ports from the drop down list above the attribute. For the switching hubs, you can also select a segment from the drop down list.
