Setting Up Security for a Device
Device Passwords
2.Select “SNMP Communities...”.
3.For the “read” Community, set MIB View = Operator; Write Access = Restricted.
4.For the “write” Community, set MIB View = Manager; Write Access = Unrestricted.
For greater security you can specify the addresses of those stations from which SNMP requests are allowed. These addresses are specified in the list of Authorized Managers associated with each community name. Include the station on which HP TopTools is installed.
Configuring for Community Names
If running Discovery does not discover all of your devices, make sure that Ping Discovery and Web Server Discovery are checked. If some devices are still not being discovered, you need to add them manually as follows:
1.Point the browser at the HP TopTools home page.
2.In the navigation frame on the left, click Settings and select Discovery from the menu.
3.Select the Additional Devices tab.
4.Type in the address of the device and click the Add Device button.
Perform the following steps to let HP TopTools know the community names for each device:
1.Point the browser at the HP TopTools home page.
2.In the navigation frame on the left, click Devices and select Device Types from the menu.
3.Select the All Devices tab.
4.Select the devices in the list at the right. You can select multiple devices if they are going to have the same community name.
5.Click the right mouse button on one of the selected devices.
6.Select the Security menu item and Set SNMP Passwords (Communities).
7.Type in the “read” community name (twice) for the selected devices and click Set Read Password.
8.Type in the “write” community name (twice) for the selected devices and click Set Write Password.
9.Run Discovery again.
N o t e | You may want to add routers manually and define their community names. |
| This improves the Discovery process. |
|
|
