Reinstalling the Cover
1Position the IBM 2210 so that the port side is facing you. From this position,
elevate the rear portion of the cover and slide it onto the IBM 2210.
Figure 4-3. Replacing the Cover
2Replace the screws that attach the cover and mounting brackets to each side
of the machine. Be sure that the screw with the Phillips head is installed in
the middle hole.
Figure 4-4. Replacing the Screws and Mounting Bracket
3If the IBM 2210 was mounted in a rack, return it to the rack.
4Plug the power cord into the outlet.
4-4 2210 Service and Maintenance