IBM SY27-0345-06 manual Installing the 14.4 Kbps Modem Port Feature in Models 14T

8 Verify that the IBM 2210 is functioning correctly by using “MAP 02 Operation” on page 2-23.

Removing the EIA 232 Service	Port	Feature	in	Models 14T and			24x
1Remove	the	cover	from	the	IBM 2210	as	described in “Cover” on p
2 Remove the two screws				that	secure	the	EIA 232 Service Port Feat
IBM 2210 frame.

3 Remove the Philips-head screw that attaches the middle of the EI Service Port Feature to the standoff on the system board.

4

5

Remove the EIA 232 Service Port Feature connection from the syste

Lift the EIA 232 Service Port Feature out of the IBM 2210 chas

Installing the 14.4 Kbps Modem Port Feature in Models 14T and 24x

Figure 4-42. Installing the 14.4 Kbps Modem Port Feature

1Remove the cover from the IBM 2210 as described in “Cover” on p

2

3

Remove the blank Service Port faceplate by unscrewing the two scre

Save the faceplate and screws.

4 Insert the	14.4 Kbps Modem Port Feature connection into the connec
the system	board.

4-402210 Service and Maintenance