IBM SY27-0345-06 manual Service Port, Settings, Modem Support, Parity, Bits

Figure A-2. Remote Connection to 14.4 Kbps Modem Port Feature (14T and 24x Mode

Figure A-3. Remote Terminal Connection to the Primary or Secondary EIA-232 Service

Port

Service Port	Default	Settings
	These are		the	default settings for the serial		port:
	Speed		9600 bps
	Parity		None
	Data	Bits	8
	Stop	Bits	1
	You can configure the service port speed				for	the following		bit	rate
	speed must match the speed configured for				the	ASCII	terminal.		The I
	supports auto-baud.
		300
		1200
		2400
		4800
		9600
		19 200
		38 400
Modem Support
	Modem Requirements
	The modem		must	be connected to the service	port on the IBM 2210, u
	nous operation, and be compatible with the				Attention (AT) command set. A
	connected		to a	2210 service port must be	configured		with	the	followi
	istics:
	Ÿ	No echo
	Ÿ	Suppress	results code
	Ÿ	Auto-answer
A-22210 Service and		Maintenance