IBM SY27-0345-06 manual Feature, Upgrading the 4-Port, Access Modem Card

Upgrading the 4-Port	Dial Access Adapter Using the 4-Port Dial
Access Modem Card	Feature

Note: This procedure assumes that you have a 4-port Dial Access Adapte installed in your IBM 2210.

Rear Blanking

Plate

CD
O		1
H
R
ea
	dy

2

3

4

5

6

7

4Port Connector Plug

Front

Blanking

Plate

Blanking

Plate

Screws

Figure 4-43. Upgrading

8

Powe

Faultr

the 4-Port Dial Access Adapter

To upgrade the 4-port Dial Access Adapter with a new 4-port Dial Acce Card:

1.Remove the Dial Access Adapter from the 2210 as described in “R Optional Adapter” on page 4-38.

2.	Remove	the	4-port Dial Access			Modem	Card	from the	anti-static	bag.
3.	Place	the	bag	on a	flat surface and place the				Dial Access	Adapt
removed		from	the	IBM	2210 on	top of	the	bag.

4.Using a flat-blade screwdriver, remove the blanking plate from the Adapter faceplate and store in a safe place. You will need to re

4-port Dial Access Modem Card is removed from the adapter.

5.Angle the upgrade such that the RJ-11 jacks align with the ports faceplate.

6.Align the 4-port connector plug on the 4-port Dial Access Modem Card

connector receptacle			on the	Dial	Access	Adapter.
7. Press	firmly	on the	4-port	Dial	Access	Modem CardPRESS over the words
HERE TO	INSERT	.

8.Using a nut driver, secure the 4-port Dial Access Modem Card in pl three (3) screws provided.

9. Reinstall the	Dial Access Adapter as described in “Installing Optiona
on page 4-36.

4-422210 Service and Maintenance