SECTION 10—BATTERIES/CHARGER
Part No 1118377 87 Pronto® M71™
Using the Proper Batteries
NOTE: For this procedure, refer to FIGURE10.1.
1. Place battery on ground/flat surface.
2. Visually draw a horizontal and vertical centerline through the middle of battery
(FIGURE 10.1).
3. Position the battery so that the terminals are above the horizontal centerline.
4. Visually inspect the battery to ensure the correct position of the POSITIVE and
NEGATIVE terminals (FIGURE 10.1).
FIGURE 10.1 Using the Proper Batteries
WARNING
Batteries with terminal configuration as shown below MUST be used. Batteries
that have the reverse terminal configuration MUST NOT be used - otherwise
injury and damage may occur.
The warranty and performance specifications contained in this manual are based
on the use of deep cycle gel cell or sealed lead acid batteries. Invacare strongly
recommends their use as the power source for this unit.
DO NOT Use
NEGATIVE (-)
Battery Terminal
POSITIVE (+)
Battery Terminal
U1 Battery
U1 Battery POSITIVE (+)
Battery Terminal
NEGATIVE (-)
Battery Terminal
Use This Configuration