Invacare M71 service manual Adjusting Van Seat Arm Angle, Adjusting Van Seat Arm Height

SECTION 5—ARMS

Adjusting Van Seat Arm Angle

NOTE: For this procedure, refer to FIGURE 5.2.

WARNING

Pinch point may occur when adjusting the arm angle position.

1.Lift-up the armrest.

2.Loosen the jam nut.

3.Adjust the socket screw up or down to the desired arm angle position.

4.Tighten the jam nut.

5.To determine the same angle for the opposite armrest, count the exposed threads after the jam nut has been tightened.

6.Repeat STEPS 1-5 for opposite armrest, if necessary.

Adjusting Van Seat Arm Height

NOTE: For this procedure, refer to FIGURE 5.2.

NOTE: This procedure is for adjustable height arms only.

1.Remove the lock knob that secures the armrest to the arm frame assembly.

2.Adjust the armrest to one of five positions in 1 inch increments.

3.Reinstall the lock knob that secures the armrest to the arm frame assembly and tighten securely.

Angle	Socket Screw
	Armrest

Count Exposed		Jam
Threads	Pinch Point	Nut

Height
	Armrest
Height
Adjustment
Holes	Arm Frame
Lock Knob
	Assembly

FIGURE 5.2 Adjusting Van Seat Arm Angle - Adjusting Van Seat Arm Height

Part No 1118377 55 Pronto® M71™