SECTION 10—BATTERIES/CHARGER
Part No 1118377 93 Pronto® M71™
FIGURE 10.5 Connecting/Disconnecting Battery Cables - Wheelchairs Manufactured After
7/14/03
Disconnecting Battery Cables
NOTE: For wheelchairs manufactured BEFORE 7/14/03, refer to FIGURE10.4 on page 92 for this
procedure.
NOTE: For wheelchairs manufactured AFTER 7/14/03, refer to FIGURE10.5 for this procedure.
1. Remove the batteries from the wheelchair. Refer to Removing Batteries on page89.
2. If necessary, disconnect the nylon webbing strap (DETAIL “C” of FIGURE10.4).
3. Cut the tie-wrap that secures the battery terminal cap in place (DETAIL “B” of
FIGURE 10.4 or FIGURE 10.5).
4. Slide terminal cap(s) up on the battery cable(s) (DETAIL “B” of FIGURE10.4 or
FIGURE 10.5).
DETAIL “B”
POSITIVE (+)
Battery
Terminal
NEGATIVE (-) Battery Terminal
Tie-wraps
U1 Battery
U1 Batteries
GREY Connector BLACK Connector on
M71 Standard OR RED
Connector on M71 PTO
Plug into Controller
DETAIL “C”
GREY Connector
RED Battery
Cable
NEGATIVE (-)
Battery
Terminal
Locknut
DETAIL “A” NOTE: Handles on batteries
removed for clarity.
Battery Lifting Strap
Hook and Loop Fastening Strips
Wide Part of
Strap
Handle
Mounting Screw
Mounting
Screw with
Fuse
Locknut
POSITIVE (+)
Battery
Terminal
BLACK
Battery
Cable
U1 Battery