5Press .

6On your computer, delete or stop the print job, and then try sending it again.

Paper or specialty media misfeeds

These are the possible solutions. Try one or more of the following:

Check paper condition

Use only new, unwrinkled paper.

Check paper loading

Load a smaller amount of paper into the printer.

Load paper with the print side facing you. (If you are not sure which side is the printable side, see the instructions that came with the paper.)

See the “Getting Started” section in the “Printing” chapter for information about:

Maximum loading amounts per paper type

Specific loading instructions for supported paper and specialty media

Remove each page as it is printed

Remove each page as it exits, and let it dry completely before stacking.

Adjust the paper guides

Adjust the paper guides:

When using media less than 215.9 mm (8.5 inches) wide

To rest against the edge of the paper or media, making sure it does not buckle.

1

2

Printer does not feed paper, envelopes, or specialty media

These are possible solutions. Try one or more of the following:

Check for paper jams

Check for and clear any paper jams. For more information, see “Jams and misfeeds troubleshooting” on page 99.

Check media loading

Verify that the specialty media is loaded correctly.

Try loading one page, envelope, or sheet of specialty media at a time.

For more information, see the “Getting Started” section in the “Printing” chapter.

Troubleshooting

101

Page 101
Image 101
Lexmark 1500 manual Paper or specialty media misfeeds, Printer does not feed paper, envelopes, or specialty media