Troubleshooting

Setup troubleshooting

Power button is not lit

These are possible solutions. Try one or more of the following:

Press power button

Make sure the printer is on by pressing .

Disconnect and reconnect the power cord

1Disconnect the power cord from the wall outlet, and then from the printer.

2Plug the cord all the way into the power supply on the printer.

2

1

3Plug the cord into an electrical outlet that other electrical devices have been using.

4If the light is not on, press .

Power light is blinking

The power light blinks when it detects errors in the printer.

Note: If the light and the page 70.

 

A

light blink alternately, see “Power light and duplex light are blinking alternately” on

 

 

 

 

 

 

 

 

These are possible solutions. Try one or more of the following:

Check print cartridges

Make sure there is a cartridge installed in the printer. If you are using a photo cartridge, make sure there is also a color cartridge installed.

If a cartridge is missing, install the missing cartridge.

Check the ink level of the color print cartridge

The color cartridge may be low on ink or out of ink. Check the ink level of the color cartridge. For more information, see “Checking the ink levels” on page 62.

If the color ink level is low, replace the color cartridge with a new one. To order a new cartridge, see “Ordering print cartridges” on page 64.

Troubleshooting

69

Page 69
Image 69
Lexmark 1500 manual Setup troubleshooting, Power button is not lit, Power light is blinking