Rev. 2 | |
CLI and Telnet Interface | CD/CIM550.IOM |
Menu Options/Fields | Entry | Description |
IGMP | I | Toggles [Enabled] and [Disabled] |
|
| This feature must be purchased. |
|
| The receive portion of a CiM will utilize the CiM as an |
|
| IGMP server. The transmit portion of a CiM will utilize |
|
| the CiM as an IGMP client. |
|
| The IGMP Information Page configures the CiM to |
|
| report an interest to join a Multicast group on an IGMP |
|
| server. The IGMP protocol is used to regulate Multicast |
|
| traffic on a LAN segment to prevent information of no |
|
| interest from consuming bandwidth on the LAN. |
Midas Operation | Read | Enabled |
| Only |
|
NAPT | Read | Unavailable |
| Only |
|
Quality of Service (QOS) | Q | Toggles [Enabled] and [Disabled]. |
|
| This feature must be purchased. |
|
| Enabled tells the CiM to apply configured QOS |
|
| parameters on all packets going out the Satellite |
|
| Interface. |
|
| Disabled tells the CiM to not apply QOS restrictions |
|
| against outgoing packets. |
Downlink Route All | M | Toggles [Enabled] and [Disabled] |
Available Multicast |
| Enabled tells the CiM to route all Multicast packets |
|
| coming from the Satellite interface to the Ethernet LAN |
|
| regardless of the Route Table entries. |
|
| Disabled tells the CiM not to route all Multicast packets. |
|
| This mode will still route multicast packets if multicast |
|
| route exists in the Route Table. |
Ping Reply | P | Toggles [Enabled] and [Disabled] |
|
| Enabled tells the CiM to respond to ping requests |
|
| directed to the CiM itself (Ethernet and Satellite |
|
| Interfaces). |
|
| Disabled tells the CiM not to respond to ping requests. |
|
| This is used as a security feature to discourage |
|
| unauthorized parities from determining if a CiM exists |
|
| via the ping utility. |
|
|
|
SNMP | N | Toggles [Enabled] and [Disabled] |
|
| Enabled tells the CiM to respond to SNMP requests |
|
| against the CiM’s private MIB. |
|
| Disabled tells the CiM not to respond to SNMP |
|
| requests against the CiM’s private MIB. |
Telnet | E | Toggles [Enabled] and [Disabled] |
|
| Enabled tells the CiM to provide access via telnet. |
|
| Disabled tells the CiM to not allow access via telnet. |
|
|
|
123