Rev. 2 | |
SNMP interface | CD/CIM550.IOM |
13.5.1.8 LOGS
Table |
|
| ||
OID | Description |
|
| |
cim550ClearEventsLog | Instructs the unit to clear all Stored Events. A value of | |||
| 1 (yes) is used to clear the event log. | |||
cim550NumberUnreadEvents | Returns the number of Stored Events which remain | |||
| unread. The value can be between 0 and 99. | |||
cim550RetrieveNext5Events | Unit returns the oldest 5 Stored Events which have not | |||
| yet been read over the remote control. Reply format: | |||
| ||||
| body{CR}Subbody, | |||
| where | |||
| A being the fault/clear indicator: F=Fault, C=Clear, | |||
| I=Info. |
|
| |
| B being the fault type where: 1=Unit, 2=Rx, Traffic, | |||
| 3=Tx Traffic, 4=Power on/off, or log cleared. | |||
| C being the fault code, where the Info codes are: | |||
| 0=power off, 1=power on, 2=log cleared, 3=global | |||
| config change, and 4=redundancy config change. | |||
| ddmmyyhhmmss = date/time stamp. | |||
| If there are less than 5 events to be retrieved, the | |||
| remaining positions are padded with zeros. | |||
cim550SetStatisticInterval | Used to set the sample interval for the Statistics | |||
| Logging Function. Can be set to: | |||
|
| 0 | None |
|
|
|
|
|
|
|
| 1 | 10 Mins |
|
|
|
|
|
|
|
| 2 | 20 Mins |
|
|
|
|
|
|
|
| 3 | 30 Mins |
|
|
|
|
|
|
|
| 4 | 40 Mins |
|
|
|
|
|
|
|
| 5 | 50 Mins |
|
|
|
|
|
|
|
| 6 | 60 Mins |
|
|
|
|
|
|
|
| 7 | 70 Mins |
|
|
|
|
|
|
|
| 8 | 80 Mins |
|
|
|
|
|
|
|
| 9 | 90 Mins |
|
cim550ClearStatisticsLog |
|
|
|
|
Instructs the unit to clear all Stored Statistics. Can be | ||||
| set to 1 (yes) to clear the log. | |||
cim550NumberUnreadStatistics | Returns the number of Stored Statistics which remain | |||
| unread. Can be between 0 and 250. |
255