Rev. 2 | |
SNMP interface | CD/CIM550.IOM |
13.4.2.5REDUNDANCY GROUP
Table
OID | Description |
cimCurrentRedundantState | Displays if the modem is Online and Offline. |
| The Online modem is the one that will |
| process traffic. The Offline modem monitors |
| the health of the online unit and will take |
| over if it detects a failure. |
cimLocalUnitManagementIpAddress | IP Address for the Ethernet Interface for the |
| Local Unit. |
cimRedundantUnitManagementIpAddress | IP Address for the Ethernet Interface of the |
| Remote Unit. |
cimRedundantTrafficIpAddress | Traffic IP address will always be active on |
| the Online Modem. When a fault occurs the |
| traffic IP address will float between the two |
| redundant modems. |
cimRedundantTrafficSubnetMaskLen | This is the length of the traffic IP address |
| and can float between the two redundant |
| modems depending on if a failure occurs. |
cimForceUnitOffline | Forces a redundant switchover so that if the |
| modem is online it will transition to offline |
| and stop processing traffic. If the modem is |
| already offline, then this command will be |
| ignored. |
13.4.2.6OPERATION AND MAINTENANCE GROUP
Table
OID | Description |
cimAppVersion | Displays the CiM Software’s name, version, and date. |
cimSaveConfiguration | Allows a user to save the current configuration of the CiM- |
| 550 to permanent storage. |
cimReset | Allows a user to reboot the modem. It has the same logical |
| effect of |
242