CiM-550 IP Enabled Satellite Modem

Rev. 2

CLI and Telnet Interface

CD/CIM550.IOM

11.2.1.7 SNMP

The SNMP Configuration page is activated from the Administration page.

The SNMP Configuration contains the following options/fields:

Menu Options/Fields

Entry

Description

SNMP Admin Get/Set

Read

GET and SET community string for Admin user. This

Community

Only

community string allows GET/SET operations to all

 

 

portions of the cimController and cim550 MIBs.

SNMP Read Write Get/Set

Read

GET and SET community string for Read Write user.

Community

Only

This community string allows GET/SET operations to

 

 

all portions of the cimController and cim550 MIBs,

 

 

except for the cimAdministration section in the

 

 

cimController MIB.

SNMP Read Only Get/Set

Read

GET and SET community string for Read Only user.

Community

Only

This community string allows GET operations in the

 

 

cim550 MIB only.

SNMP Trap Destination

T

IP address where all traps/notifications will be sent. If

 

 

a network management application is running in the

 

 

network, it should be configured to receive traps and its

 

 

IP address should be entered here.

SNMP Trap Community

C

Community string which will be set in the Community

 

 

field of all outgoing traps. This field on the trap PDU

 

 

may be checked by the network manager application to

 

 

determine if the trap came from a “trusted” agent.

SNMP trap Version

V

Determines whether a SNMPv1 trap or SMNPv2

 

 

notification is sent.

SNMP Enable

A

Determines whether a MIB2 authentication trap will be

Authentication Trap

 

sent when a PDU with an invalid community string is

 

 

encountered. A community string is invalid when it

 

 

does not match the Admin, the Read Write, or the

 

 

Read Only community strings.

128