CiM-550 IP Enabled Satellite Modem

Rev. 2

Front Panel Menus

CD/CIM550.IOM

SELECT\CONFIG\MASK\BUF-SLIP

 

DISPLAY

 

SELECTIONS/DESCRIPTION

 

 

 

 

 

 

 

ACTIVE - If the user selects ACTIVE, then a

 

SEL BUF-SLIP ALARM MASK:

 

 

Receive Traffic fault will be generated whenever the

 

ACTIVE MASKED(PRESS ENT)

 

receive circuitry senses that the buffer has either

 

 

underflowed, or overflowed.

 

 

 

MASKED - If the user selects MASKED, no alarm

 

 

 

 

 

will be generated.

 

 

 

 

SELECT\CONFIG\MASK\TX-AIS

 

DISPLAY

 

SELECTIONS/DESCRIPTION

 

 

 

 

 

 

 

ACTIVE - If the user selects ACTIVE, then a

 

SEL TX-AIS ALARM MASK:

 

 

Transmit Traffic fault will be generated whenever

 

ACTIVE MASKED(PRESS ENT)

 

the transmit circuitry senses that the ‘all ones’

 

 

condition is present in the transmit data.

 

 

 

MASKED - If the user selects MASKED, no alarm

 

 

 

 

 

will be generated.

 

 

 

 

4.1.5.2.7 SELECT\CONFIG\IMPED

 

DISPLAY

 

SELECTIONS/DESCRIPTION

 

 

 

 

 

 

 

50 Ohms

 

SELECT IF IMPEDANCE:

 

 

75 Ohms

 

50 OHMS 75 OHMS (ENTER)

 

 

 

 

 

 

 

 

 

 

4.1.5.3 SELECT\TEST

 

DISPLAY

 

SELECTIONS/DESCRIPTION

 

 

 

 

 

 

 

 

 

NORM

 

TEST: NORM

TX-CW TX-1,0

 

 

TX-CW

 

IF2 DIG2

I/O2 RF2 (ENT)

 

TX-1,0,

 

 

 

 

IF LOOP

 

 

 

 

DIG LOOP

 

 

 

 

I/O LOOP

 

 

 

 

 

NORM

(Normal) This clears any test modes or loopbacks, and places the unit

 

back into an operational state.

 

 

TX-CW

(Transmit CW) This is a test mode which forces the modulator to

 

transmit a pure carrier (unmodulated).

41