
Rev. 2 | |
CLI and Telnet Interface | CD/CIM550.IOM |
11.2.4.1IGMP INFORMATION PAGE
The page IGMP information page is activated from the Protocol Configuration page.
The IGMP Information page allows a user to view the IGMP clients that are actively listening to content being provided by the CiM. It also allows the user to determine how the Ethernet Interface is configured either to receive requests to join IGMP groups or announce groups for others to join.
The IGMP Information page contains the following options/fields:
Menu Options/Fields | Entry | Description |
IGMP | Read | Read only showing IGMP status (Enabled or Disabled). |
| Only |
|
View IGMP Table | V | This table reports the content that clients have |
|
| subscribed to the CiM using the IGMP protocol. This |
|
| allows an operator to determine which services are |
|
| being used and the minimum time before a service will |
|
| be terminated. |
CiM as Server: | Q | The IGMP protocol requests that a server periodically |
IGMP query period |
| publish to users on the LAN the Multicast IP Addresses |
|
| that it can service. The IGMP query period defines the |
|
| time interval (in seconds) between each of these |
|
| queries for membership. |
CiM as Server: | R | The IGMP max response time defines the time interval |
IGMP max. response time |
| (in seconds) that the CiM should wait before it |
|
| assumes that no parties are interested in the content |
|
| published via an IGMP query. This option is expressed |
|
| seconds, and the max response time that is accepted |
|
| by the CiM is 25 seconds. |
143