CiM-550 IP Enabled Satellite Modem

Rev. 2

Front Panel Menus

CD/CIM550.IOM

4.1.5.2.3 SELECT\CONFIG\FRAME

 

DISPLAY

 

SELECTIONS/DESCRIPTION

 

 

 

 

 

 

 

TRANSPARENT - No framing is selected. No

 

SELECT FRAMING MODE:

 

 

overhead is added, and the unit will be compatible

 

TRANSPARENT FRAMED (ENT)

 

with other manufacturer’s equipment, when

 

 

operating in a ‘standard’ configuration (IESS 308

 

 

 

filtering, V.35 scrambling, Viterbi).

 

 

 

 

 

 

SELECT\CONFIG\FRAMED

 

DISPLAY

 

SELECTIONS/DESCRIPTION

 

 

 

 

 

 

 

Embedded Distant-end Monitor And Control is

 

SELECT FRAMING OPTION:

 

 

enabled or disabled in this sub-menu.

 

EDMAC-OFF EDMAC-ON (ENT)

 

If EDMAC-OFF is selected then none of the EDMAC

 

 

 

features are available, even though framing will still

 

 

 

be enabled.

 

 

 

 

 

If EDMAC-ON is selected, the user is further

 

 

 

prompted to select whether the unit is an EDMAC

 

 

 

master, or an EDMAC slave:

SELECT EDMAC MODE: MASTER SLAVE (ENTER)

An EDMAC MASTER is a unit which is local to the M&C computer, and which passes messages, via the overhead, to a distant-end modem.

An EDMAC SLAVE is a unit which is not local to the M&C computer, which is at the distant-end of a satellite link.

EDIT DISTANT-END'S ADDR: 0240 (SEE HANDBOOK)(ENT)

(FRAMED/ON) EDMAC MASTER

Edit the address of the distant-end modem which this unit will pass messages to.

There is a restriction on values which can be entered here - they may only be in increments of 10. This is automatically taken care of - the user may not edit the last digit of the address. This has been implemented so that a single MASTER may pass messages for up to 10 devices at the distant end. The valid range of addresses is from 10 to 9990.

37