Rev. 2 | |
SNMP interface | CD/CIM550.IOM |
OID | Description |
| |
OduUnitFaults | Used to Query the Alarm status of the CSAT. A integer | ||
| value will be returned between 0..262143 where the bits | ||
| that are set indicate the faults which have occurred: | ||
|
|
|
|
|
| bit 0 | 24 volt power supply |
|
| bit 1 | 20 volt power supply |
|
| bit 2 | 12 volt power supply |
|
|
|
|
|
| bit 3 | 10 volt power supply |
|
| bit 4 | +5 volt power supply |
|
| bit 5 | |
|
|
|
|
|
| bit 6 | Tx Synthesizer Unlocked |
|
| bit 7 | Tx IFLO Unlocked |
|
| bit 8 | Rx Synthesizer Unlocked |
|
| bit 9 | Rx IFLO Unlocked |
|
| bit 10 | Reference lock detect |
|
| bit 11 | LNA Current Alarm |
|
| bit 12 | Fan Current Alarm |
|
| bit 13 | Temperature Alarm |
|
| bit 14 | HPA Thermal Shutdown Alarm |
|
| bit 15 | Internal IIC Bus Alarm |
|
| bit 16 | EEPROM Checksum |
|
| bit 17 | NVRAM/RTC Low Battery Alarm |
|
|
|
|
13.5.1.15 ODU LOGS
Table
OID | Description |
oduClearEventsLog | Can be set to 1 (yes) to issue command. |
oduNumberUnreadEvents | CSAT returns the number of Stored Events which remain |
| unread. Value can be between 0 and 99. |
oduRetrieveNext5Events | CSAT returns the oldest 5 Stored Events that have not yet |
| been read over the remote control. Reply format: Sub- |
| |
| body, |
| where |
| YYYYYYYYYY being the fault description. |
| ZZ being the alarm type: FT = Fault, OK = Clear, IF = |
| Information. |
| mmddyyhhmmss = date/time stamp. |
261