CiM-550 IP Enabled Satellite Modem

Rev. 2

Front Panel Menus

CD/CIM550.IOM

4.1.5.2.1 SELECT\CONFIG

 

DISPLAY

 

SELECTIONS/DESCRIPTION

 

 

 

 

 

 

 

ALL

 

CONFIG: ALL TX RX FRAME

 

 

TX

 

INTFC REMCONT MASK IMPED

 

RX

 

 

 

The ALL menu sub-branch permits the user to

 

 

 

 

 

completely configure the unit, being prompted, step

 

 

 

by step, to make choices, or edit data. This is highly

 

 

 

recommended for new users, as it will clearly

 

 

 

demonstrate all the parameters which need to be

 

 

 

set.

SELECT\CONFIG\TX

Allows the user to define, on a parameter-by-parameter basis, the transmit configuration of the unit. These menu sub-branches would be used if the user wished to change, for example, just the Transmit frequency.

DISPLAYSELECTIONS/DESCRIPTION

TX: MOD FREQ DATA FEC

ON/OFF PWR SCRAM CLK TSI

SELECT\CONFIG\TX\MODULATION

 

DISPLAY

 

SELECTIONS/DESCRIPTION

 

 

 

Note: If a TURBO FEC option is

 

SELECT TX MODULATION:

 

 

selected, the modulation type will

 

BPSK QPSK OQPSK (ENTER)

 

be automatically fixed, and the

 

 

user will be presented with a

 

 

 

warning screen.

 

 

 

 

 

 

SELECT\CONFIG\TX\FREQUENCY

 

DISPLAY

 

SELECTIONS/DESCRIPTION

 

 

 

 

 

 

 

Select the digit to be edited. Change the

 

EDIT TX FREQUENCY:

 

 

value of the digit using the UP/DOWN

 

72.2345 MHz (PRESS ENT

 

arrow keys, then press ENTER.

 

 

The range of frequencies is from 52 – 88

 

 

 

 

 

 

MHz (70 MHz factory option) or 104 – 176

 

 

 

 

 

MHz (140 MHz factory option).

 

 

 

 

28