CiM-550 IP Enabled Satellite Modem

Rev. 2

CiM IP Module Checkout & Fault Isolation

CD/CIM550.IOM

14.2.3TRANSMIT AND RECEIVE IF CONFIGURATION

Step Procedure

1Configure the transmit and receive IF parameters on CiM 1 and CiM 2 via the front panel.

Note: The IF parameters can also be set via console menu, Telnet, web interface and SNMP - but for this exercise, it is recommended that the front panel be used.

2Set the TxPower to minimum level.

3Before proceeding to next step, make sure that each CiM is locked to the other CiM.

14.2.4BASIC IP CONFIGURATION

Step Procedure

1Launch the terminal emulation program - such as HyperTerminal on Microsoft Windows.

2Select the appropriate COM port (to which the DB-9 end of the console cable is connected) and configure it for:

38,400 bps

8 data bits no parity

1 stop bit

no hardware flow control

3Press return and to bring up the Main menu.

421