CiM-550 IP Enabled Satellite Modem

Rev. 2

Front Panel Menus

CD/CIM550.IOM

EDIT THIS UNIT'S ADDRESS 0245 (SEE HANDBOOK)(ENT)

(FRAMED/ON) EDMAC SLAVE

The valid range of addresses is from 1 to 9999, although ‘base 10' values will be automatically skipped.

Remember that this is a unit which is intended to be located at the distant-end of a link, and will therefore be under the control of a MASTER at the other end. This is the equivalent of putting the unit into Remote Control mode - no local control is possible.

4.1.5.2.4 SELECT\CONFIG\INTFC

 

 

 

DISPLAY

 

 

 

SELECTIONS/DESCRIPTION

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EIA-422/530

 

DATA INTERFACE:

EIA-

 

 

 

 

 

V.35

 

422/530

IP (ENTER)

 

 

EIA-232

 

V.35 EIA-232

 

 

IP

 

 

 

 

 

 

 

Note: Selecting either EIA-422/530, V.35, or EIA-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

232 as the interface rather than IP will

 

 

 

 

 

 

 

 

 

change the CiM-550 to CDM-550 emulation

 

 

 

 

 

 

 

 

 

mode. The CiM-550 will then pass standard

 

 

 

 

 

 

 

 

 

serial traffic, like a CDM-550, but will not

 

 

 

 

 

 

 

 

 

pass IP traffic. The CiM can still be

 

 

 

 

 

 

 

 

 

accessed via the ethernet port using Telnet,

 

 

 

 

 

 

 

 

 

HTTP, or SNMP.

 

 

 

 

 

 

 

 

 

If the user selects IP, the following screen is

 

 

 

 

 

 

 

 

 

displayed:

 

 

 

EDIT UNIT’S IP ADDRESS:

 

 

 

 

 

 

010.006.007.224/16 (ENT)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

38