CiM-550 IP Enabled Satellite Modem

Rev. 2

CLI and Telnet Interface

CD/CIM550.IOM

11.2.2.1FAST ETHERNET INTERFACE (FEI0) PAGE

The Fast Ethernet Interface page is activated from the Interface Configuration page.

The Fast Ethernet Interface page contains the following options/fields:

Menu Options/Fields

Entry

Description

MAC Address

Read

The MAC Address defines the hardware destination MAC

 

Only

Address that is used when an Ethernet packet is destined

 

 

for the CiM Ethernet Interface. This address is unique and

 

 

has been assigned permanently at the factory.

Speed/Mode

E

The Ethernet Speed Mode is a configurable parameter of

 

 

the CiM and thus its exact setting can very between

 

 

specific installations. The default setting allows the

 

 

Ethernet port to auto negotiate its link speed on power-up.

 

 

Selections are:

 

 

1 -- Auto

 

 

2 -- 10 MB/sec Half Duplex

 

 

3 -- 100 MB/sec Half Duplex

 

 

4 -- 10 MB/sec Full Duplex

 

 

5 -- 100 MB/sec Full Duplex

IP Address

I

This is the IP Address assigned the CiM Ethernet

 

 

Interface.

 

 

Enter the ip address in aaa.bbb.ccc.ddd format

Subnet Prefix Length

M

Specifies the Subnet Mask assigned to the Ethernet

 

 

Interface of the CiM.

 

 

Enter the subnet mask prefix length (8..30)

Save Parameters

S

This option allows a user to save the current configuration

 

 

of the CiM to permanent storage. This configuration will be

 

 

restored on each successive power cycle of the CiM.

Exit

X

This option allows a user to exit the current menu and

 

 

return to its parent menu.

131