CiM-550 IP Enabled Satellite Modem

Rev. 2

CiM IP Module Checkout & Fault Isolation

CD/CIM550.IOM

14.2.5MAIN MENU

Figure 14-1. Main Menu

To use this onterface, select the appropriate sub-menu or the entry by pressing the character indicated at the right. Enter x to return to the previous menu.

14.2.6RESTORING FACTORY DEFAULT CONFIGURATION

The following sections in this guide assume that the CiM is still in factory default configuration for IP. If that’s not the case, the factory default configuration can be restored from the menu:

Step Procedure

1 From the Main Menu, select Administration sub-menu.

2 From the Administration menu, select Operations and Maintenance sub-menu.

3 From the Operations and Maintenance menu, select Database Operations sub-menu4 From the Database Operations menu, select Restore Factory Default option

5 Confirm when prompted.

This will erase any user configuration and restore the CiM to factory default configuration.

14.2.7CIM 1 CONFIGURATION

CiM has 2 data interfaces - a LAN interface and a WAN interface. The LAN interface is a 10/100baseT Ethernet port (fei0). The WAN interface is the serial synchronous HDLC interface (hdl0). The Ethernet MAC address is factory assigned and cannot be changed.

14.2.1.1SETTING IP ADDRESS(ES)

Step Procedure

1From the Main Menu select Interface Configuration sub-menu.

2From the Interface Configuration Menu select Ethernet Interface (fei0)

3Set IP Address to 172.16.10.10

4Set Subnet Prefix Length to 24

5From the Interface Configuration Menu select Satellite/HDLC Interface (hdl0).

6Set IP Address to 10.1.1.1

7Set Subnet Prefix Length to 24

8Set RX – Enable/Disable and TX – Enable/Disable to Enable.

9From Receive HDLC Channel Address menu set HDLC Addr 1 to 1 (0x0001)

The other parameters can be left to their factory default settings.

422