Mocomtech CIM-550 58

CiM-550 IP Enabled Satellite Modem	Rev. 2
Front Panel Menus	CD/CIM550.IOM

ACTION WHEN REMOTE DEMOD UNLOCKS: NOM-PWR MAX-PWR

DEMOD UNLOCK screen

Select the action that will occur if the remote demod is unlocked.

NOM-PWR

MAX-PWR

SELECT\CONFIG\TX\SCRAM

	DISPLAY		SELECTIONS/DESCRIPTION

			When Transparent mode is selected, a
	SELECT TX SCRAMBLING		When Transparent mode is selected, a
	SELECT TX SCRAMBLING		V.35 scrambler is used. In Framed or
	OFF ON (PRESS ENTER)		Reed-Solomon modes, a frame
	OFF ON (PRESS ENTER)		synchronized scrambler is used.

SELECT\CONFIG\TX\CLK

	DISPLAY		SELECTIONS/DESCRIPTION

			INT
	SELECT TX CLOCKING MODE:		INT
	SELECT TX CLOCKING MODE:		EXT
	INT EXT LOOP-TIMED (ENT)		LOOP-TIMED

INTERNAL - indicates that the CiM-550 will supply a clock to the DTE, which is derived from its internal high-stability source.

EXTERNAL - indicates that the CiM-550 expects to receive a clock from the DTE, to which the unit can phase-lock its internal circuits.

LOOP-TIMED- indicates that the transmit timing source should be the receive clock, from the direction of the satellite. This is a useful mode, in that no external connection needs to be made in this mode. If the demodulator loses lock, or if there is no receive signal present, the internal clock is substituted. Note also that this mode will work even with asymmetric RX and TX data rates.