7 |
Connector Pin Assignments
TMCPN710 Transition Module 10BaseT/100BaseTx Connector (J13)
The 10BaseT/100BaseTx Connector is an RJ45 connector located on the rear panel of the TMCPN710 Transition Module to support optional ethernet I/O from the Transition Module. To enable this option requires that the proper zero ohm resistors be installed on the processor board. The pin assignments for this connector are as follows:
Table 7-13. TMCPN710 10BaseT/100BaseTx Connector (J13)
1TD+
2TD-
3RD+
4AC Terminated
5AC Terminated
6RD-
7AC Terminated
8AC Terminated
Computer Group Literature Center Web Site |
