
5 |
Remote Start Via the PCI Bus
Bits 9 to 15 7 bit command option field. Each command specifies the particular meaning of each of the command option bits. Option bits which are unused are considered reserved and should be written to 0 to ensure compatibility with future implementations of this interface.
Note For most commands, bit 9 is used to specify verbose/non- verbose mode target command processing. In verbose mode, command related information is printed on the target console as the host command is processed. Verbose mode is selected when bit 9 = 0,
Bits 16 to 31 16 bit data/result field. The meaning of this field is specific to each command opcode. Refer to Table
Computer Group Literature Center Web Site |