Motorola MCPN750A, IH5 manual Wide Scsi 16-bit bus Narrow Scsi 8-bit bus. Default

4

CNFG and ENV Commands

Auto-Initialize of NVRAM Header Enable [Y/N] = Y?

YNVRAM (PReP partition) header space will be initialized automatically during board initialization, but only if the PReP partition fails a sanity check. (Default)

NNVRAM header space will not be initialized automatically during board initialization.

Network PReP-Boot Mode Enable [Y/N] = N?

YEnable PReP-style network booting (same boot image from a network interface as from a mass storage device).

NDo not enable PReP-style network booting. (Default)

SCSI Bus Reset on Debugger Startup [Y/N] = N?

YSCSI bus is reset on debugger setup.

NSCSI bus is not reset on debugger setup. (Default)

Primary SCSI Bus Negotiations Type [A/S/N] = A?

AAsynchronous SCSI bus negotiation. (Default)

SSynchronous SCSI bus negotiation.

NNone.

Primary SCSI Data Bus Width [W/N] = N?

WWide SCSI (16-bit bus).

NNarrow SCSI (8-bit bus). (Default)

Secondary SCSI Identifier = “07”?

If the board has a secondary SCSI controller, this number is the secondary SCSI ID or address. For the MCPN750A, all PCI add-on SCSI controllers/adapters supported by PPCBug are set to the SCSI ID value entered here.

4-4 Computer Group Literature Center Web Site