NETGEAR WFS709TP-100NAS Configuring Snmp, Snmp for the WFS709TP, Basic WFS709TP Snmp Parameters

WFS709TP ProSafe Smart Wireless Switch Software Administration Manual

Configuring SNMP

WFS709TP switches and access points (APs) support versions 1, 2c, and 3 of SNMP for reporting purposes only. SNMP cannot be used for setting values in a WFS709TP system in the current version.

SNMP for the WFS709TP

Follow the steps below to configure a WFS709TP’s basic SNMP parameters:

1.Configure the host name by navigating to the Configuration > Basic > Management > SNMP page on the browser interface (Figure 13-1).

Figure 13-1

2.Enter the parameters described in Table 13-1.

Table 13-1. Basic WFS709TP SNMP Parameters

Field	Description	Expected/Recommended Value
Host Name	Host name of the WFS709TP.	String to act as the host name for the
		WFS709TP being configured.
System Contact	Person who acts as the System	System contact’s name and contact
	Contact or administrator for the	information.
	WFS709TP.
System Location	Location of the WFS709TP.	String to describe the location of the
		WFS709TP.

13-2 Configuring Management Utilities

v1.0, June 2007