NETGEAR WFS709TP-100NAS manual Enabled

WFS709TP ProSafe Smart Wireless Switch Software Administration Manual

Figure 8-2

Table 8-1 describes the configuration options on this page.

Table 8-1.Captive Portal Authentication Browser Interface Page Options

Parameter	Description	Default
Authentication Enabled	Enables Captive Portal authentication.
Enable Guest Logon	Enables Captive Portal logon without authentication.	Disabled
Enable User Logon	Enables Captive Portal with authentication of user credentials.	Enabled
Enable Logout Popup	When this option is enabled, a pop-up window appears with	Enabled
Window	the Logout link for the user to log out. If this is disabled, the
	user remains logged in until the user timeout period or until
	the station reloads.
Protocol Type	The protocol used on re-direction to the Captive Portal page. If	https
	you select HTTP, modify the captive portal policy to allow
	HTTP traffic.
Redirect Pause Time	The time, in seconds, that the system remains in the initial	10
	welcome page before re-directing the user to the final web
	URL. If set to 0, the welcome page displays until the user
	clicks on the indicated link.
Welcome Page Location	The page that appears soon after logon and before re-	/auth
	direction to the web URL. This can be set to any URL.	/welcome.html

8-4 Configuring the Captive Portal

v1.0, June 2007