NETGEAR WFS709TP-100NAS manual Configuring Management Utilities 13-11

WFS709TP ProSafe Smart Wireless Switch Software Administration Manual

Table 13-6. Access Point SNMP Traps (continued)

Trap	Description	Priority Level
OUI misconfiguration	This trap indicates an error in the Organizationally Unique	High
	Identifier (OUI) configuration of an AP. The AP generates the
	trap and includes its BSSID, the configured SSID, and the
	location of the AP in the trap.
SSID misconfiguration	This trap indicates an error in the SSID configuration of an AP.	High
	The AP generates the trap and includes its BSSID, the
	configured SSID, and the location of the AP in the trap.
Short Preamble	This trap indicates an error in the Short Preamble	High
misconfiguration	configuration of an AP. The AP generates the trap and
	includes its BSSID, the configured SSID, and the location of
	the AP in the trap. This check will be done only if the short-
	preamble option is selected for the AP from the browser
	interface.
AM misconfiguration	This trap indicates an error in the Short Preamble	High
	configuration of an AP. The AP generates the trap and
	includes its BSSID, the configured SSID, and the location of
	the AP in the trap.
Repeat WEP-IV violation	The AM has detected a valid station or a valid AP sending	High
	consecutive frames that have the same initialization vector
	(IV). This usually means that entity has a “flawed” WEP
	implementation and is therefore a potential security risk.
Weak WEP-IV violation	The AM has detected a valid station or a valid AP sending	High.
	frames with an IV that is in the range of IVs that are known to
	be cryptographically weak and therefore are a potential
	security risk.
Adhoc networks detected	The AM has detected Adhoc networks.	High
Valid station policy	A valid Station policy is being violated.	High
violation
AP interference.	The indicated AM (identified by the BSSID/ SSID) is detecting	Medium
	AP interference on the indicated channel.
Frame Retry rate	The percentage of received and transmitted frames with the	Medium
exceeded	retry bit has crossed the High watermark. This event can be
	triggered for an AP, a station, or a channel. The two values
	that should be configured related to this event are Frame
	Retry Rate – High Watermark and Frame Retry Rate –Low
	Watermark. *

Configuring Management Utilities 13-11

v1.0, June 2007