NETGEAR WFS709TP-100NAS manual V1.0, June

WFS709TP ProSafe Smart Wireless Switch Software Administration Manual

Figure 9-2

3.Enter the user information.

a.In the User Name field, enter the MAC address of the device to be used, (this is the MAC- address of the physical interface that will be used to access the network). By default, the entry should be in the format xxxxxx.

b.Enter the same address in the same format in the Password and Verify Password fields.

c.Select the Enabled checkbox to activate the user.

4.Click Apply to apply the settings.

To delete a user from the database:

1.Navigate to the Security > AAA Servers > Internal Database page.

2.Click Delete to the right of the user you wish to delete.

To disable a user:

1.Navigate to the Security > AAA Servers > Internal Database page.

2.Click Disable to the right of the user you wish to disable.

The user’s entry will still exist in the database, but it will not be used for authentication purposes.

Configuring MAC-Based Authentication 9-3

v1.0, June 2007