NETGEAR WFS709TP-100NAS manual Zoom

WFS709TP ProSafe Smart Wireless Switch Software Administration Manual

Figure 4-7

You can select or adjust the following features, which are described in more detail in this section:

•Zoom. Use this pull-down menu or type a zoom factor in the text field to increase or decrease the size of the displayed floor area.

•Approximate Coverage Map. Use this pull-down to select a particular radio type for which to show estimated coverage.

•Coverage Rate. Use this pull-down to modify the coverage areas based on a different data rate.

•Edit Floor. Click this link to launch the Floor Editor dialog box. See “Floor Editor Dialog Box” on page 4-12.

•New in Areas section. Click this link to launch the Area Editor dialog box. “Area Editor Dialog Box” on page 4-13.

•New in Suggested Access Points and Air Monitors. Click this link to launch the Suggested Access Point Editor dialog box. “Access Point Editor Page” on page 4-15.

Zoom

The Zoom control sets the viewing size of the floor image. It is adjustable in discrete steps from 10% to 1000%. You can either select a value from the pull-down zoom menu or specify a value in the text box to the left of the pull-down. When you specify a value, RF Plan adjusts the values in the pull-down to display a set of values both above and below the value you typed in the text box.

RF Plan 4-11

v1.0, June 2007