NETGEAR WFS709TP-100NAS manual Basic Access Point Snmp Parameters

WFS709TP ProSafe Smart Wireless Switch Software Administration Manual

1.Navigate to the Configuration > Advanced > WLAN > Network > General page of the master WFS709TP (Figure 13-2). This page includes fields for configuring the SNMP parameters on all access points in the network.

Figure 13-2

2.Configure the basic SNMP parameters in the SNMP System Information area. The fields are similar to those for the WFS709TP, and are explained in Table 13-3.

Table 13-3. Basic Access Point SNMP Parameters

Field	Description	Expected/Recommended Values
Host Name	Host name for all Access Points in the	A name to identify the devices as
	network.	WFS709TP APs.
System Location	Location for Access Points in the	String to identify the location of the
	network.	APs.
System Contact	Contact name or information for	String to identify administrative contact
	administrative contact.	for all APs.

Configuring Management Utilities 13-5

v1.0, June 2007