NETGEAR WFS709TP-100NAS manual WPA Fast Handover

WFS709TP ProSafe Smart Wireless Switch Software Administration Manual

WPA Fast Handover

In 802.1x authentication, the WPA fast handover feature allows certain WPA clients to use a pre- authorized Pairwise Master Key (PMK), significantly reducing handover interruption. Check with the manufacturer of your handset to see if this feature is supported. This feature is disabled by default.

Note: This feature supports WPA clients, while opportunistic key caching (also configured in 802.1x authentication) supports WPA2 clients.

To enable WPA fast handover:

1.Navigate to the Configuration > Advanced > Security > Authentication Methods > 802.1x page.

2.Under Advanced Configuration, select Show.

3.Select WPA FastHandover.

4.Click Apply.

14-4 Configuring WFS709TP for Voice

v1.0, June 2007