NETGEAR WFS709TP-100NAS manual V1.0, June

WFS709TP ProSafe Smart Wireless Switch Software Administration Manual

2.Set IRM Assignment to Single Band from the pull-down menu.

Note: The Multi Band option is currently unavailable. Selecting Multi Band automatically sets the selection to Single Band

3.Select IRM Scanning to enable scanning on the AP.

4.(Optional) Set the IRM Scan Interval and IRM Scan Time on a per-AP basis

These values can be left to the default setting unless they need to be modified for a specific environment.

5.The AP scans the network and hops to the best available channel based on the IRM algorithm. Sometimes clients may not be able to adapt to this kind of dynamic AP channel change. To disable an AP from changing channels when an active client is connected to it, select IRM Client Aware.

6.Click Apply to apply the configurations.

Configuring WLANS 5-21

v1.0, June 2007