NETGEAR WFS709TP-100NAS manual V1.0, June

WFS709TP ProSafe Smart Wireless Switch Software Administration Manual

Figure 4-10

Naming. You can name an area using an alphanumeric string of characters with a maximum length of 64 characters. Give areas meaningful names so that they are easily identified.

Locating and Sizing. Specify absolute coordinates for the lower left corner and upper right corner of the box that represents the area you are defining. The datum for measurement is the lower left corner of the rectangular display area that represents your building’s footprint. The coordinates of the upper right corner of the display area are the absolute (no unit of measure) values of the dimensions you gave your building when you defined it with the dimension feature.

Note: The location is zero-based. Values range from 0 to (height - 1 and width - 1). For example, if you defined your building to be 200 feet wide and 400 feet long, the

coordinates of the upper right corner would be (199, 399).

Don’t Care areas are displayed as orange rectangles (Figure 4-11) and Don’t Deploy areas are displayed as yellow rectangles (Figure 4-12). You can drag your defined area to the location where you want it, and resize it by dragging one or more of the handles in the corners of the rectangle.

Figure 4-11

Figure 4-12

4-14 RF Plan

v1.0, June 2007