NETGEAR WFS709TP-100NAS manual Configuring AAA Servers

WFS709TP ProSafe Smart Wireless Switch Software Administration Manual

Table 6-1. RADIUS Server Configuration Information

Parameter	Description
Num Retries	Maximum number of retries sent to the server by the WFS709TP
	before the server is marked as down (default is 3)
Timeout	Maximum time, in seconds, that the WFS709TP waits before timing out
	the request and resending it (default is 5 seconds
NAS Source IP Address	Network Access Server (NAS) IP address to send in RADIUS packets.
NAS Identifier	NAS identifier to use in RADIUS packets.
Match ESSID	Match the ESSID for the user name
Match FQDN	Match the fully qualified domain name (FQDN) in the user name
Trim FQDN	Trim the FQDN from the user name before sending to the RADIUS
	server
Mode	Enables or disables the server

2.Navigate to the Configuration > Advanced > Security > AAA Servers > RADIUS Servers page.

3.Click Add to add a new RADIUS server entry. Enter the values you gathered into the fields shown in Figure 6-1.

Figure 6-1

6-2 Configuring AAA Servers

v1.0, June 2007