NETGEAR WFS709TP-100NAS manual Access Point/Air Monitor Traps, Access Point Snmp Traps

WFS709TP ProSafe Smart Wireless Switch Software Administration Manual

Table 13-5. WFS709TP SNMP Traps (continued)

Trap	Description	Priority Level
Authentication ACL table	The maximum number of ACL entries in the ACL table has	High
full	been exceeded. The limit is 2048 entries on a WFS709TP.
Power supply failure	One of the two possible power supplies in the WFS709TP has	Critical
	failed.
Fan failure	The fan in the WFS709TP has failed.	Critical
Out of Range Voltage	An out-of-range voltage is being supplied to the WFS709TP.	Critical
Out of Range	An out-of-range operating temperature being supplied to the	Critical
temperature	WFS709TP.
Line card inserted/	A Line Card has been inserted or removed from the	Critical
removed	WFS709TP.
Supervisor card inserted/	A Supervisor card has been inserted or removed from the	Critical
removed	WFS709TP.
Power supply missing	One of the power supplies is missing.	Critical

Access Point/Air Monitor Traps

Table 13-6lists the key traps generated by an access point or an air monitor,

Table 13-6. Access Point SNMP Traps

Trap	Description	Priority Level
Unsecure AP detected	An AM has detected and classified an AP as unsecure. This	Critical
	trap will indicate the location of the AM that has detected the
	unsecure AP, the channel on which the AP was detected, and
	the BSSID and SSID of the detected AP.
Station impersonation	An AM has detected a Station impersonation event. The trap	Critical
	will provide the location of the AM that has detected the event
	and the MAC address of the Station.
Reserved channel	An AP is being detected is violating the Reserved Channels.	High
impersonation	This trap will indicate the location of the AP or AM that detects
	the event, and the BSSID and SSID of the detected AP.
Valid SSID violation	This trap indicates a violation in the configuration of the SSID	High
	of the AP. The AP generates the trap and includes its BSSID,
	the configured SSID, and the location of the AP in the trap.
Channel misconfiguration	This trap indicates an error in channel configuration of an AP.	High
	The AP generates the trap and includes its BSSID, the
	configured SSID, and the location of the AP in the trap.

13-10 Configuring Management Utilities

v1.0, June 2007