WFS709TP ProSafe Smart Wireless Switch Software Administration Manual
2.Navigate to the Configuration > Advanced > Security > AAA Servers > Internal Database page.
3.Click Add User in the Users section. The user configuration page displays.
4.Enter the information for the user.
5.Click Enabled to activate this entry on creation.
6.Click Apply to apply the configuration.
To edit or delete an internal database entry, click Edit or Delete in the Action column of the entry.
•If you are editing the entry, enter your changes, then click Apply to save the configuration.
•If you are deleting the entry, a
Configuring Authentication Timers
You can configure the following timers that apply to all users and RADIUS servers:
•User Idle Timeout. The time, in minutes, that a client has to respond to the WFS709TP before it has to
•Authentication Server Dead Time. The maximum period, in minutes, that the WFS709TP considers an unresponsive authentication server to be down. This timer only applies when two or more authentication servers are configured on the WFS709TP. If there is only one authentication server configured, the server is never considered down and all requests are sent to the server.
If one or more backup servers are configured and a server is unresponsive, it is marked as down for the dead time; subsequent requests are sent to the next server on the priority list for the duration of the dead time. If the server is responsive after the dead time has elapsed, it can take over servicing requests from a
•Logon User Lifetime
These timers can be left at the default values for most implementations.
To set an authentication timer:
1.Navigate to the Configuration > Advanced > Security > AAA Servers page; click the General tab if it is not already selected.
Configuring AAA Servers |
