NETGEAR WFS709TP-100NAS manual V1.0, June

WFS709TP ProSafe Smart Wireless Switch Software Administration Manual

•You can assign only one VLAN to the SSID. If you need to have multiple VLANs configured for a WLAN, you must configure the SSID using the WLAN Advanced Configuration pages.

•The authentication server must be a RADIUS server or the WFS709TP’s internal database.

If you specify a RADIUS server, you can configure the server’s IP address, authentication and accounting ports, and shared key.

Note: The RADIUS server administrator must configure the server for communication with the WFS709TP.

If you specify the WFS709TP’s internal database, you will need to navigate to the Configuration > Advanced > Security > Authentication Servers > Internal DB to add entries to the database.

To configure an SSID in the WLAN Basic Configuration page, navigate to the Configuration > Basic > WLAN page (Figure 5-1).

Figure 5-1

Configuring WLANS 5-5

v1.0, June 2007