NETGEAR WFS709TP-100NAS manual Rebooting APs

WFS709TP ProSafe Smart Wireless Switch Software Administration Manual

Figure 10-3

3.Apply the configuration on the master.

Note: To verify that the local WFS709TP has obtained a copy of the global settings, check the local WFS709TP for the global configuration changes made on the

master, such as authentication changes and WMS settings.

Rebooting APs

The configuration changes take effect only after rebooting the affected APs; this allows them to reassociate with the local WFS709TP. In the example shown in Figure 10-3, AP 1.1.20 will be rebooted. After rebooting, these APs appear to the new local WFS709TP as local APs (Figure 10-4).

Figure 10-4

10-4 Adding Local WFS709TPs

v1.0, June 2007