NETGEAR WFS709TP-100NAS manual Running the AM Plan

WFS709TP ProSafe Smart Wireless Switch Software Administration Manual

The algorithm stops when the movement is less than a threshold value calculated based on the number of APs. The threshold value is displayed in the status bar at the bottom of the browser window.

Note: To see the approximate coverage areas of each of the APs, select an AP type from the Approx. Coverage pull-down box and select a rate from the Coverage

Rate pull-down box.

The result should look similar to Figure 4-29.

Figure 4-29

3.Click Save, then click AM Planning.

Running the AM Plan

Running the AM Plan algorithm is similar to running the AP Plan.

1.Click Initialize then Start.

The algorithm stops when the movement is less than a threshold value calculated based on the number of AMs. The threshold value is displayed in the status bar at the bottom of the browser window.

4-30 RF Plan

v1.0, June 2007