NETGEAR WFS709TP-100NAS manual Configuring Management Utilities 13-13

WFS709TP ProSafe Smart Wireless Switch Software Administration Manual

1.Navigate to the Configuration > Advanced > Switch > Management > Logging page on the browser interface (Figure 13-6).

Figure 13-6

2.To add a logging server, click Add in the Logging Server section.

3.Click Add to add the logging server to the list of logging servers. Ensure that the syslog server is enabled and configured on this host.

4.Determine if the logging levels are set as required.

•If the logging levels of all the modules are set as required, proceed to step 6.

•To modify the logging level of any of the modules, select the required module from the list of the modules shown. From the drop-down list that appears on the screen, choose the appropriate logging level.

Configuring Management Utilities 13-13

v1.0, June 2007