Quad Desktop Charger Procedure Steps | Nortel Networks NN10042-116

126Desktop Charger

The handset can be off or in standby state during charging.

2Place the handset, face forward, into the Dual Charger.

The LED displays the charging status. If required, refer to Single Charger procedure.

3Charge the handset battery.

If the handset is in standby mode, it displays its extension number and Charging. It is fully operational and can receive calls.

If the handset is off, only Charging is displayed and the handset cannot receive calls.

It is normal for the battery pack to become warm when charging.

4When the handset is fully charged, Charge Complete is displayed. Remove the handset from the charger.

The battery pack starts to charge.

--End--

Procedure Steps

Step Action

Quad Desktop Charger

Procedure Steps

Step Action

1Insert the battery pack into one of the four charging bays. The LED above the charging bay turns on.

If the LED starts to blink as soon as the battery pack is inserted, remove the battery pack and reinsert it into the charger.

If a flashing LED indicates a battery pack failure, check the battery pack in a different bay or substitute another charger and repeat the operation that caused the failure.

If the same battery pack lights a steady LED when inserted in a different bay or charger, the first charger can be faulty. Contact your system administrator for service information.

2When the charge is complete, the LED turns off. Remove the battery pack from the charger.

--End--

Carrier VoIP

Nortel IP Phone WLAN Handset User Guide (CICM)

NN10042-116 04.01 Standard

4 July 2008

Copyright © 2008 Nortel Networks

Image 126

Nortel Networks NN10042-116 manual Quad Desktop Charger Procedure Steps

Contents

Nortel IP Phone Wlan Handset User Guide Cicm Legal Notice Contents Turn the handset on and off Answer a call Additional Call Features 111 Copyright 2008 Nortel Networks Copyright 2008 Nortel Networks New in this release FeaturesThere were no feature changes made to this document Other changes New in this release Overview NavigationIP Phone 221x handset controls IP Phone handset description 221x handset controls Control MeaningIP Phone 2211 and 2212 handsets Page IP Phone 2210 handset IP Phone 2211 handset IP Phone 2212 handset IP Phone 2210 Series Navigation keys IP Phone 6120 handset IP Phone 6140 handset Wlan Handset 2210 Series IP Phone handset controlsIP Phone handset controls Control Meaning Wlan Handset 6100 Series IP Phone handset display IP Phone handset controls cont’d Control MeaningIP Phone 2211, 2212, and 6140 handsets Active/off-hook state Power offStandby states Active/idle state Push-to-talk state Error stateActive call state IP Phone handset modes of operation Active Idle ErrorHandset Switchover Conﬁg Menu Message Alert Push-to-talk PTTStandby IP Phone handset status indicators, icons, and softkeys Softkey label Description and Action New in this release Inbox Outbox Server Access Point APHardware requirements Communication Server CS 2000 UNIStim Security Wireless Security Switch WSSFirmware for the Wlan Handset 6100 Series Wlan Charger CICM-EM Terminal Configuration page for the Wlan Handset CICM-EM User Profile modification page for the Wlan Handset New in this release Cicm menu system Cicm main menuCicm menu hierarchy for IP Phone Wlan Handset Logoff FeatureReset Audio Use this item to test the local mode DiagnosticsUse History menu to Reset the Inbox Reset the Outbox User New in this release IP Phone Wlan handset menus Function key menuFunction Key menu Item number Function name Description User Option menu User Option menu Function name Description User Option menu cont’d Function name Description Type New in this release Turn the handset on and off Procedure StepsFollow this procedure to turn on the handset Navigation Turning off the handset Prerequisites Procedure StepsLogging on You must be logged out Logging on Logging off Follow these steps to log off from the systemYou must be logged on, and the handset must be active Logging off Using the Audio menu Using the Audio menu Using the main menu Using the main menu Follow these steps to navigate the Feature menu Use the Cicm Feature menuNavigating the Feature menu Prerequisites Using the Assign menus Feature Assign menu must be displayed Press Key Type Labeling a feature key Using the Options menus Conﬁguring Auto Hide Procedure Steps Assigning a default DN key Procedure Steps Enabling or disabling the Cicm Outbox Procedure StepsAuto Hide Resetting the feature keys to their defaults Use the Cicm Feature menu Testing the local mode Testing the local mode Using the User menu Follow this procedure to access the User submenusNavigating the User information menus Enabling Auto Login Follow this procedure to view your user nameViewing your user name Viewing your login type Changing your passwordFollow this procedure to change your log on password Prerequisites Follow this procedure to make a call Using off-hook dialingUsing Predial Make a call Editing the predial number Redial last numberPress the End button Press the Actv soft key Making a call using a headset Answering a call using a headsetMaking a call using a line Make a call Press the Power on/Start call key Answer the call Answering a call while using a headsetFollow this procedure to answer a call Answer a call Call Waiting To return to the first telephone call, go to Step Ending a call Ending a call While on an active call Place a call on hold Call Park Follow this procedure to retrieve a call that is on holdRetrieve a call on hold You must have a call on hold Follow this procedure to transfer a call to a third party Call Park on the DN Procedure StepsCall Park on another DN Procedure Steps Transfer a call Connect calls using Call Join Set up a Conference callYou must be on an active call Mute a call Follow this procedure to unmute a callPress the FCN key Feature Keys menu appears Unmute a call Record Caller Number Trace a malicious call While away from your desk Call Forward Turn off Call Forward Follow this procedure to turn off the Call Forward featureInternal Call Forward Call forwarding must be activated Turn off Call Forward While away from your desk Work without interruption Activate Make Set BusyDeactivate Make Set Busy Make Set Busy feature must be enabled Using the Inbox Use the Inbox and OutboxHandset must be active You must have a call in the Inbox Using the Outbox Follow this procedure to use the OutboxYou must have assigned the Outbox to a DN key Resetting the Inbox or the Outbox History screen must be displayed Use the Inbox and Outbox Using the User Option menu Handset must be in standby modeEnter an Extension number Select a Language Enable the Lock Key menu Select Phone Options Select Noise Mode Procedure Steps Change the Key Tones Procedure Steps Change the Warning Tones Procedure Steps Change the Display Contrast Procedure Steps Change the Keypad Autolock Procedure Steps Select Ring Options Select Ring Cadence Procedure Steps Select Ring Tone Procedure Steps Select Ring Volume Procedure Steps Select Vibrate Cadence Procedure Steps Select Ring Delay Procedure Steps Follow this procedure to silence the handset ringer Silence the Ring View System Information View the alias IP addressView the IP address View the server IP address View Terminal Type View ﬁrmware information You cannot edit this information Enter text using the dialpad Enter text using the dialpad Navigating the directory Follow this procedure to navigate the directoryUse the Cicm Directory Handset must be active Adding an entry to the directory Follow this procedure to delete a directory entry Editing a directory entryDeleting a directory entry Making a call using the Directory Follow this procedure to dial a number using the directory Additional Call Features Charge a call before dialing a call Procedure StepsCall Charge Charge a call in progress Procedure Steps Charge a call when transferring a call Procedure StepsAt the tone, dial the number Charge a call during a conference call Procedure Steps Enhanced Override Forced Camp-on Privacy Release Initiate a PTT call Procedure Steps Push-to-talk You hear the PTT call Press End to exit the PTT call Push-to-talk Additional Call Features Using the Battery Pack Low battery indicator Removing the battery packInserting a battery pack Changing a battery pack during a call Charging the battery packProcedure steps Procedure Steps Prerequisites Desktop Charger Wlan Handset 2210 Series Desktop Charger Wlan Handset 6100 Series Desktop Charger Single Desktop Charger Procedure Steps Dual Desktop Charger Procedure StepsPress End to terminate any calls Quad Desktop Charger Procedure Steps Handset maintenance Cleaning the handsetLow power indicators Cleaning the handset connector Cleaning the Desktop ChargerCleaning the Desktop Charger connectors Cleaning the Desktop Charger Desktop Charger Terms you should know FCN key Feature Access Codes FACFeature Keys menu Fixed keyPage Nortel IP Phone Wlan Handset User Guide Cicm