4. Telephone
25
7. Select “Save”, then press {>}.
8. Press {ih}.

Voice enhancer

You can change the tone quality of the receiver
while you are on a call. 3 settings are available.
1. Press {j/OK} during a call.
2. Select “Voice Enhancer”, then press {>}.
3. Select the desired setting, then press {>}.
Note:
LIf you select “High Tone” or “Low Tone”,
“[VE]” is displayed.

Mute

You can mute your voice during a conversation.
While mute is turned ON, you will be able to hear
the other party, but the other party will not be
able to hear you.
1. To mute your voice, press {C/T}.
2. To return to the conversation, press {C/T}
again.

Key lock

The cordless handset can be locked so that no
calls or settings can be made. Incoming calls can
be answered, but all other functions are disabled
while key lock is ON. Emergency calls (page 73)
cannot be made until key lock is turned OFF.
To turn key lock ON, press {j/OK} for about 2
seconds.
L“[X]” is displayed.
To turn key lock OFF, press {j/OK} for about
2 seconds.
Note:
LKey lock is turned OFF when the cordless
handset is turned OFF.
4.1.2 With the base unit
1Lift the handset or press {SP-PHONE}.
2Dial the telephone number.
3When finished talking, replace the handset
or press {SP-PHONE}.

Speakerphone operation

LFor best performance, please note the
following:
–Talk into {MIC} (microphone).
– Use the speakerphone in a quiet
environment.
– Speak alternately with the caller.
– If you or the other party have difficulty
hearing each other, press {A} or {B}
repeatedly to adjust the speaker volume
as necessary.
LWhile talking using the handset, you can
switch to a speakerphone conversation by
pressing {SP-PHONE}, then replace the
handset. To switch back, lift the handset.

To redial the last number dialled from the

base unit

Press {SP-PHONE}, then press
{REDIAL/PAUSE}.

To redial automatically

Press {SP-PHONE}, then press
{REDIAL/PAUSE}.
LIf the line is busy, the unit will automatically
redial the number up to 11 times. While the
base unit is redialling, mute is automatically
turned ON.
Note:
LIf mute does not turn OFF after the line is
connected, press {MUTE}.

Mute

You can mute your voice during a conversation.
While mute is turned ON, you will be able to hear
the other party, but the other party will not be
able to hear you.
1. To mute your voice, press {MUTE}.
2. To return to the conversation, press {MUTE}
again.
{REDIAL/PAUSE}
{SP-PHONE}
{MIC}
{MUTE}{A}{B}
FC962HK-PFQX2283ZA-en.book Page 25 Thursday, September 15, 2005 4:20 PM