4. Telephone
5.Press {A} or {B} repeatedly to select “ON” or “OFF” (default), then press {SET}.
6.Press {MENU}.
Note:
LWhen the night mode is turned ON, “[N]” is displayed.
Setting the start and end time for night mode
1.Press {MENU}.
2.Press {#}, then {3}{5}.
3.Press {SET}.
4.Press {A} or {B} repeatedly to select “START/END”, then press {SET}.
5.Enter the desired hour and minute you wish to start this feature by selecting 2 digits for each.
L If you use
6.Enter the desired hour and minute you wish to end this feature by selecting 2 digits for each.
L If you use
7.Press {SET}.
8.Press {MENU}.
Setting the ring delay for night mode
This setting allows the base unit to ring during night mode if the caller waits long enough. After the selected delay time has passed, the base unit will ring. If you select “NO RINGING”, the base unit will not ring during night mode.
1.Press {MENU}.
2.Press {#}, then {3}{5}.
3.Press {SET}.
4.Press {A} or {B} repeatedly to select “RING DELAY”, then press {SET}.
5.Select the desired setting. “30s”: 30 seconds “60s” (default): 60 seconds “90s”: 90 seconds “120s”: 120 seconds
“NO RINGING”: the base unit will not ring.
6.Press {SET}.
7.Press {MENU}.
4.8 Caller ID service
This unit is compatible with Caller ID service offered by your local telephone company. To use this feature, you must subscribe to Caller ID service.
Important:
LThis unit will only display the caller’s
telephone number and name.
LThis unit will not support future additional
telephone services.
LDepending on the service of the local telephone company, the date/time of the call or the caller’s name may not be displayed.
4.8.1 How Caller ID is displayed
When an outside call is received, the calling party’s telephone number or name will be displayed. You then have the option of whether or not to answer the call.
The unit will automatically store caller information (telephone number, name, date and time of the call) of the last 30 callers. Caller information is stored by the most recent to the oldest call. When the 31st call is received, the oldest call is deleted.
Caller information can be viewed on the display one item at a time (page 35) or confirmed by printing the Caller ID list (page 97).
Note:
LCaller information can be displayed up to 16 digits/characters for the base unit and 22 digits/16 characters for the cordless handset.
LWhen caller information is received and it matches a telephone number stored in the unit’s phonebook:
–The stored name will be displayed and logged.
–The cordless handset will use the ring tone assigned to the caller’s category.
LIf the unit is connected to a PBX (Private Branch Exchange) system, caller information may not be received properly. Consult your PBX supplier.
LIf the unit cannot receive caller information, the following will be displayed (For Caller ID users only):
“OUT OF AREA”/“Out of Area”: The caller dialled from an area which does not provide Caller ID service.
“PRIVATE CALLER”/“Private Caller”: The caller requested not to send caller information.
34
