9. Programmable Features
9.5.1 Programmable functions
{j/OK}
{C}
LThe alarm will sound at the set time even when the ringer is turned OFF.
LIf you select “Once”, the setting will be changed to “Off” after the alarm sounds.
9.5.3 Ringer options
Changing ring tones
{>}{e}{v}
Helpful hints:
{ih}
You can choose the ring tone used by the cordless handset.
“Ext. Ringtone”: Selects the ring tone for outside calls.
“Int. Ringtone”: Selects the ring tone for intercom calls.
LTo exit programming, press {ih} at any time.
9.5.2 Alarm
Setting alarm
An alarm will sound for 3 minutes at the set time once or daily.
Set the date and time beforehand (page 20).
1.Press {j/OK}.
2.Select “Handset Setup”, then press {>}.
3.Select “Time Settings”, then press {>}.
4.Select “Alarm”, then press {>} 2 times.
5.Select an alarm mode, then press {>}.
–“Once”: The alarm will sound once at the set time. Enter the desired day and month by selecting 2 digits for each.
–“Daily”: An alarm will sound daily at the set time.
–“Off” (default): Turns the alarm OFF. Press {>} again, then press {ih} to finish.
6.Enter the desired hour and minute by selecting 2 digits for each.
L You can select “AM”, “PM” or
7.Press {j/OK}.
8.Select the ring tone that will sound at the set time, then press {>}.
9.Select “Save”, then press {>}.
10.Press {ih}.
Note:
LTo stop the alarm, press any dial key. L When the cordless handset is in talk or
intercom mode, the alarm will not sound until the call has ended.
L Alarm volume depends on cordless handset ringer volume (page 18).
1.Press {j/OK}.
2.Select “Handset Setup”, then press {>}.
3.Select “Ringer Setup”, then press {>}.
4.Select the desired item, then press {>}.
5.Select the desired ring tone, then press {>}.
6.Press {ih}.
Note:
LIf you select one of the melody ring tones, the ring tone will continue to sound for several seconds if the caller hangs up before you answer. You may hear a dial tone or no one
on the line when you answer a call.
LThe preset melodies in this product are used
with permission of © 2004
LTo set the base unit ring tone, see feature #17 on page 62.
9.5.4 Display setup
Selecting the standby mode display
“Base Number”: The current base unit number is displayed.
“Handset Number”: The current cordless handset number is displayed.
“Off” (default): Only the current date and time are displayed.
1.Press {j/OK}.
2.Select “Handset Setup”, then press {>}.
3.Select “Display Setup”, then press {>}.
4.Select “Standby Display”, then press
{>}.
5.Select the desired setting, then press {>}.
6.Press {ih}.
Note:
L If “Base Number” is selected and the current base unit number is 2,
70
