5. Fax
48
activation is turned ON beforehand (feature
#41 on page 64). The default setting is ON.
To stop receiving
Press {STOP}.
5.8.2 Activating TEL/FAX mode1Make sure feature #73 is set to “TEL/FAX”
beforehand (page 65).
2Press {AUTO ANSWER} repeatedly to
display the following.
TEL/FAX MODE
LThe {AUTO ANSWER} indicator on the
base unit turns OFF and u disappears
from the cordless handset display.
3The ringer volume setting should be ON
(page 19).
How phone calls and faxes are received
1. “INCOMING CALL” will be displayed but the
unit will not ring.
2. The unit will wait for the duration of 2 rings
before answering the call.
LThe number of rings is determined by the
“TEL/FAX delayed ring setting” (feature
#78 on page 66).
LDuring this time, an extension telephone
(if connected to the same line) will ring.
3. The unit will answer the call and try to detect
a fax calling tone.
When a fax calling tone is detected
The unit receives the fax automatically
without ringing.
When a fax calling tone is not detected
A The unit will ring. You may answer the call.
LCallers will hear a ring back tone different
from the one generated by the telephone
company.
LAn extension telephone (if connected to
the same line) will not ring at this time. To
answer the call with the extension
telephone, lift the handset and press
{*}{0} (default auto disconnection code)
while the fax machine is ringing.
B If you do not answer the call, the unit will
activate the fax function.
LSome fax machines do not generate fax
calling tones when sending faxes,
therefore the unit will try to receive a fax
even if no fax calling tone is detected.
Note:
LEven if you press the auto disconnection
code, the fax machine will activate the fax
function:
– If the extension telephone is connected to
[EXT],
– Depending on the type of extension
telephone,
press {STOP} on the fax machine to talk with
the calling party.
FC962HK-PFQX2283ZA-en.book Page 48 Thursday, September 15, 2005 4:20 PM