Printronix MVP Series user manual Density Specifications, Standard MVP L150 136C

Density Specifications

The following table list both the horizontal and vertical dot densities (dots/inch) in each of the print modes as well as their character pitches in inches:

			Standard MVP		L150	136C
Mode 1			100 x 96		100 x 96	100 x 96
Pitch			10		10	10
Chars/line			132		132	132
Mode 2			60 x 72		60 x 72	60 x 72
Pitch			10		10	10
Chars/line			132		132	132
Mode 3			62.5 x 64		62.5 x 64	62.5 x 64
Pitch			12.5		12.5	12.5
Chars/line			165		165	165
Mode 4			50 x 48		72.5 x 72	50 x 48
Pitch			10/8.3		12.1/12.5	10/8.3
Chars/line			132/110		159/165	136/113
Mode 5			100 x 72		80 x 72	105x 72
Pitch			16.7		13.3	17.5
Chars/line			220		175	238
Mode 1 = Correspondence or Word Processing
Mode 2 =		Data Processing
Mode 3 =		Draft Mode
Mode 4	=	High Speed plot; 8.33 cpi (45.0 and 59.0)
	=	Draft Mode; 10 cpi		(45.1 and 59.0)
	= High Density Bar Code (12.5 cpi with MCU 20.25) or
		(12.1 cpi with LM .0x MCU)
Mode 5	=	Condensed Print; 16.7 cpi (59.0 and 56.0)

=Condensed Print; 17.5 cpi (59.0 and 56.1)

=High Density Barcode; 13.3 cpi (59.1) Standard = Normal Mode (59.0 and 56.0)

L150 = Barcode Mode (59.1)

136 C = 136–column print mode( 56.1 and 59.0)

Programming 7–37